idealaworld,Innokin iTaste MVP 3.0 Pro

Innokin iTaste MVP 3.0 Pro

  • £27.99
  • Save £5
Tax included. Shipping calculated at checkout.

Innokin iTaste MVP 3.0 Pro

One of the newer additions to the MVP series from Innokin. The Innokin iTaste MVP 3.0 Pro is a fantastic kit that, in addition, features a sophisticated variable voltage which ranges from 3 to 9 volts.

This is Not only powerful but the iTaste MVP 3.0 is also stylish, discreet and a sleek modern looking design. Coupled with a 4500mah of battery capacity, you will be vaping for days between recharging and also the

MVP3 Pro continues to function as a portable mobile and electronics charger with an integrated Micro USB cable! When you need real power your MVP3 Pro will be there for you.

Please Note

A tank is not included with this kit and therefore needs to be purchased separately, click here to purchase.

Primary Features

Variable Voltage: Voltage can be adjusted from 3.0 – 9.0 volts in .1 volt increments.

Variable Wattage: Wattage can be adjusted from 6.0 – 60.0 Watts in .5 watts increments.

Battery Level Indicator: The MVP3 Pro e-cigarette battery capacity is displayed via green, yellow and red LED.

  • Green = Almost fully Charged. When the unit is fully recharged the LED light will power off
  • Yellow = Half Power
  • Red = Low Power. Charge the MVP3 Pro

ON / OFF battery switch: Press the power button three times in rapid succession to turn on the MVP3 Pro. When it is powered on Hold down the button to activate the atomizer and vape.


  • 10 second Cut-off
  • Low Voltage Warning
  • Short Circuit / Atomizer Protection

Over-Discharge Protection

'Vape while charging' Technology The MVP3 Pro is recharged with a Micro USB cable. When plugged into a power source the MVP3 Pro can also be vaped and charged at the same time with Innokin Technology's 'Vape while you charge' pass-through technology.

Technical Specifications

  • Operating Voltage: 3.0V - 9.0V
  • Operating Wattage: 6.0W - 60W
  • Maximum output Wattage: 60W
  • Battery : 3.7V 4500mAH (16.65WH)
  • Standby current: 200uA max
  • Maximum output Current: 17.5A
  • Maximum output Voltage: 9.0
  • Clearomizer Resistance: 0.2 Ohms (minimum)
  • Charging: Micro USB DC5V / 1A
  • OUTPUT port :DC5V / 1A


  • Read everything you need to know about converting to vaping!
  • Not for sale to persons under the age of 18.
  • Keep out of reach of children.
  • For further information, kindly Contact Us.


We at iDeaLA do not own any of the images displayed on this page, credit goes to the respective owner. Kindly contact us if you'd like these images removed.

We Also Recommend